Cable without converter/descrambler box, Cable with i 1 converter/descràmblêr box, External input mode – Sears 934.4482639 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CABLE WITHOUT
CONVERTER/DESCRAMBLER BOX
Use this connection if your cable system connects
directly to your TV /VCR without a converter box.
CABLE WITH i 1
CONVERTER/DESCRÀMBLÊR BOX
If your cable service supplies you with a converter
box you can use the basic connection shown here.
EXTERNAL INPUT MODE
When using an external input signal, connect the
audio/video cable to the AUDIO IN, VIDEO IN
jacks. To use the external input jack, selet the AUX
position. Press CH.
"A"
or button or enter "00"
with number button so that AUX appears on the
screen.
Control. Unattended recording is limited to one
channel at a time.
TO RECORD AND VIEW A SCRAMBLED/UN-
SCRAMBLED CHANNEL
1. Set the TV/VCR channel selector to the output
channel of the Cable Converter Box. (Ex. CH3)
2. Select the channel to be recorded or viewed on
the Cable Converter Box.
Note to CATV system installer
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building as close to the point of cable entry as practical.
-11 -