Installing feed handles – Sears 113.21371 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
2.
Apply
a
light
film
of
oil
such
as
Sears
household
oil
to
the spindle nose.
3.
Place
the
chuck
on
the
spindle
nose
and
screw
the
locking collar up as far as it will go.
4.
Insert a piece of 1/4" dia. STEEL ROD in to one of the
holes in the chuck body.
5.
Insert
the
CHUCK
KEY
into
one
of
the
holes
in
the
collar
.
.
.
TURN
IT
IN
THE
DIRECTION
OF
ARROW
UNTIL IT IS TIGHT.
6.
To
remove
chuck,
turn
the
collar
in
the
opposite
direction until the chuck is ejected from the spindle.
INSTALLING FEED HANDLES
1.
Screw
a
FEED
HANDLE
into
each
of
the
threaded
holes in the hub, and tighten.
L O C K I N G C O L L A R A
Advertising