Sears 85951 - Manual (Page 11)

RECALL AND CHANGE OF SETTINGS
To Recall a Setting
To recall (check) a setting before you start the oven, follow the directions below.
• To check the setting for a given stage, touch MEMORY/ RECALL one or more times until the correct stage
light and indicator light turns on. The set TIME or TEMP CONTROL for that stage will show in the display
window.
• To check the cooking power level, touch POWER CONTROL.
To recall (check) a setting while the oven is operating, follow the directions below.
• To check settings while the oven is operating, touch the desired pad to recall the setting for the operating
stage.
• To recall a future stage, touch STOP, follow the directions above for recalling (checking) a setting before
starting the oven, and then touch START to continue cooking.
• To recall TIME OF DAY while the oven is running, touch TIME OF DAY.lt will show momentarily in the
display window.
• To recall Recipe number (s) while the oven is running, touch RECIPE #, and it will show momentarily in
the display window.
To Change a Setting
Recall the setting to be changed by following the directions above and make the change as follows:
• Touch STOP ................................................. The oven will stop cooking.
• Touch TIME ................................................. Then touch “0" until only one “0" shows in the display
window. Set the cooking time.
• Touch TEMPERATURE CONTROL . . . . Set food temperature.
• Touch POWER CONTROL........................... Set cooking power level. To reset to “HI”, set “99”,
maximum power.
PAUSE BETWEEN STAGES
Some recipes require stirring, turning and adding or removing of foods between stages. To set the oven to stop
between stages, touch PAUSE rather than MEMORY/RECALL when setting the oven. If pause is set, the oven
will automatically stop and the word “PAUS" will flash in the display window. After the pause, to restart the
oven, touch START.
11