Using the wall-mounted door control, Warning, Disconnect the trolley – Sears 139.53930D User Manual

Page 31: To re-connect the trolley

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Using the Wall-Mounted Door Control

To Open the Door Manually

Press the lighted push button to open

or close the door. Press again to

reverse the door during the closing

cycle or to stop the door while it's
opening.

WARNING

To prevent possible SERIOUS INJURY or DEATH from a falling
garage door:
• If possible, use emergency release handle to disengage

trolley ONLY when garage door is CLOSED. Weak or broken
springs or unbalanced door could result in an open door
falling rapidly and/or unexpectedly.

• NEVER use emergency release handle unless garage

doorway is clear of persons and obstructions.

• NEVER use handle to pull door open or closed. If rope knot

becomes untied, you could fall.

DISCONNECT THE TROLLEY:

The door should be fully closed
if possible. Pull down on the
emergency release handle (so
that the trolley release arm
snaps into a vertical position)
and lift the door manually. The

lockout feature prevents the

trolley from reconnecting
automatically, and the door can
be raised and lowered
manually as often as
necessary.

Trolley

TO RE-CONNECT THE
TROLLEY:

Pull the emergency release
handle toward the opener at

an angle so that the trolley

release arm is horizontal. The

trolley will reconnect on the
next UP or DOWN operation,
either manually or by using
the door control or remote.

Lockout position

(Manual disconnect)

Trolley

31

Advertising