Energy-saving tips, Before you call for service – Sears KENMORE 61968 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Energy-Saving Tips

• Don't open the doors more often than necessary,

• Close the doors as soon as possible, particularly in hot,

humid weather

• Keep the Power Miser Switch in the left position unless

moisture forms on the cabinet in hot, humid weather

• Be sure the doors are closed tightly. Before leaving the

house or retiring for the night, check to be sure the doors
haven't been left open accidentally.

• Store only those foods requiring refrigeration in your

refrigerator

Before You Call for Service

Save time and money Check this list of causes of minor
operating problems you con correct yourself,

Refrigerator does not operate

• May be in defrost cycle when motor does not operate

for about 35 minutes,

• Temperature control in OFF position.

• If interior light is not on, refrigerator may not be

plugged in at wall outlet.

• If plug is secure and refrigerator fails to operate, plug

lamp or small appliance into same outlet to determine if

there is tripped circuit breaker or burned out fuse.

Motor operates for long periods

• Modern refrigerators with more storage space and a

larger freezer compartment require more operating time.

• Normal when refrigerator is first delivered to your

home—usually requires 24 hours to completely cool

down.

• Large amounts of food placed in refrigerator to be

cooled or frozen,

• Hot weather—frequent door openings,

• Door left open ,

• Temperature controls are set too cold- Refer to page 4,

• Condenser needs cleaning. Refer to page 11.

• Check ENERGY-SAVING TIPS on page 14,

Motor starts & stops frequently

• Temperature control starts and stops motor to maintain

even temperatures. This is normal.

• Wipe moisture from bottles and cartons before putting

them in the refrigerator

• Keep foods covered to reduce moisture buildup inside

the refrigerator.

• If you turn the controls to the coldest position for quick

chilling or freezing, be sure to turn them bock to regular
settings.

• Don't overcrowd your refrigerator. Overcrowding can

require extra electrical energy to keep everything cool.

Vibration or rattling

• If refrigerator vibrates, more than likely it is not resting

solidly on the floor, The front roller screws need adjusting,

or floor is weak or uneven Refer to page 3.

• if dishes vibrate on shelves, try moving them. Slight

vibration is normal.

Operating sounds

• The high speed compressor motor required to maintain

near zero temperatures in the large freezer compartment
may produce higher sound levels than your old
refrigerator,

• Normal fan air flow—one fan blows cold air through the

refrigerator and freezer compartments-another fan cools
the compressor motor.

' These NORMAL sounds will also be heard from time to

time:

“Defrost timer switch clicks at defrost,

-Defrost water dripping.

“Temperature control clicks ON or OFF,

-Refrigerant boiling or gurgling.

-Cracking or popping of cooling coils caused by

expansion and contraction during defrost and
refrigeration following defrost.

-Ice cubes dropping into the bin and wafer running in

pipes as icemaker refills

Hof air from bottom of refrigerator

• Normal airflow cooling motor. In the refrigeration

process, it is normal that heat be expelled in the area
under the refrigerator. Some floor coverings will discolor
at these normal and safe operating temperatures. Your
floor covering supplier should be consulted if you object

to this discoloration.

14

Advertising