Reversing door swing – Sears KENMORE 61968 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Reversing Door Swing

¡continued)

(c) Remove handle plug, using putty knife, and
remove screw underneath.

(d) Remove handle.

(e) Transfer two screws from handle holes in top

right of door to opposite side

(f) Transfer plug button in top left of door to
opposite side.

Ig)

Transfer plug button on right front of door to

handle hole vacated by removal of screw under
handle plug,

(h) Reassemble handle to right side of door. Use

front screw removed in Step (a) to attach handle to

bottom of door

Transferring doorstops

(a) Remove metal doorstop on bottom right of
each door

(bj Replace door stops on left side after handles
have been moved.

Rehanging the fresh food door

(a) Lower the bottom
socket of the fresh food

door onto the pin on the

bottom hinge. Be sure

the washer is in place on
the pin,

¡b) Tilt the door towards
the cabinet and gently
push the door under the
center hinge bracket and
align with the hole in the
center hinge bracket,

(c) Reinstall the hinge
pin with a 3/8" socket

and ratchet so it extends
through the hole in the
center hinge bracket and
into the socket on top of
the fresh food door,

/

Plastic Washer

Rehanging the freezer door

(a) Lower the bottom socket of the freezer door onto the
center hinge pin. Be sure the washer is in place,

(b) Tilt the door towards the cabinet, lifting the top hinge

so the pin fits into the socket on top of the door,

(c) Tighten the top hinge screws after supporting the door

on the handle side and aligning so the gap between the
doors is even all across the front,

(d) Replace the hinge cover,

18

Advertising