Threading top thread, Threading top th read – Sears 1345 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THREADING TOP THREAD
10
Raise thread take-up lever to its highest
position by turning hand wheel toward you.
Raise presser foot lever. Place thread spool
on spool pin.
Draw
thread
through
thread
guide
1.
Holding
spool
stationary
with
right
hand,
pull thread through the tension discs. Puli
the end of the thread taut with the left hand.
3.
This will pull the spring wire up and past the
end of the hook. The thread will then slip
into the hook when the spring is released.
Draw thread up through thread guide 4 take-
up lever 5 and down through lower thread
guides 6, 7, 8 to needle.
The needle must be threaded from front to
rear. Draw 3 to 4 inches of thread through
the eye of needle.