Seam q|||||e, L»iiesser foot lever, Feed dog control (model 1358) – Sears 1345 User Manual
Page 16: Feed dog control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEAM Q|||||E$
Seam guides are printed on needle plate, at
both sides of needle, to help you line up the
fabric and keep it straight. The standard
seam width is 5/8". So these lines are
emphasized, easy to follow.
Also the cross lines are "cornering guides" to
help when turning a square corner 5/8" from
the fabric edge. (For details on cornering, see
page 25.1
l»IIESSER FOOT LEVER
Presser foot lever has a two position lift.
In order to place heavy fabric under the
presser foot or to change the presser foot
raise the presser foot lever to its maximum
upward position as shown.
FEED DOG CONTROL
(Model 1358)
The feed dog control is located on the right
front of the machine bedplate. There are a
few times when you want to control the
feeding of the fabric yourself. When the
control is turned to the left, the feed dogs
drop and do not move the fabric.
For most of your sewing, turn knob to the
right.