Sears 437.83235 - Manual (Page 6)

AIR INTAKE GRILU| - Dirty air is drawn in 360° into the
Kenmore HEPA Air Gjleaner.
AIR OUTLET - Afterithe air has been cleaned by the HEPA
filter, it is dispersed UPWARDS into the surrounding
atmosphere.
CARRYING handle - A convenient handle is provided to
enable easy relocati^|n of your air cleaner.
FILTER CHANGE DATE CALENDARS - Two filter change
date wheels are provided as a convenient reminder when
to replace the pre-filler and the HEPA filter.
SET-UP
Visually inspect the МЕРА air cleaner upon removing the
unit from its box. Remove and discard any packaging
material. Return the ipnit if it shows any signs of damage or
mishandling. This uri t was thoroughly inspected and tested
at the factory prior tc^ packaging.
Upon start up of your Kenmore HEPA Air Cleaner, set the
Pre-fiiter Change D^l;e Calendar ahead 3 months and the
HEPA Change Date (Calendar ahead 2 years to indicate
when the next filter replacement is necessary.
CAUTION: DO NOT
any computer or any
as floppy disks or place the air cleaner within 3 feet of
magnetically sensitive devices such
ta^es.
ELECTRICAL HpOK-UP
Plug the air cleaner Ijito a polarized 120 Volt AC wall outlet.
WARNING
To avoid fire or shock hazard, the HEPA air cleaner should
only be plugged intq a polarized 120 Volt AC outlet.
NEVER operate the HEPA air cleaning system without the
HEPA filter properly installed. Permanent motor damage
could result.
OPERATION
Each time the air cleaner is operated, turn the control
switch to the
III (super) position for a fast initial cleaning for
a few seconds. Then adjust the control switch to the
desired output setting:
III (super) - Maximurtp operation - fast initial cleaning
II (high) - Daytime operation - fast fan speed
I (low) - Night-time -| quieter operation
Turn IONIZER switch ON.