Sears 437.83235 - Manual (Page 9)

step 11
Lock the base into place by replacing and tightening the
locking mechanism i^ecurely.
Step 12
Adjust the fiiter charitae caiendar(s) to properly indicate
when the next filter ghange is necessary.
Step 13
aner upright and the HEPA air cleaner Turn the HEPA air cl
is ready for operatioi
STORAGE
If you store your K^hmore HEPA Air Cleaning System
for more than 30 days, we recommend that you;
1. Remove both the
charcoal pre-filter
2. Discard the pre-i
3. Wrap the HEPAf
plastic wrap. Be
primary HEPA fiiter and the
from the unit.
Iter.
Iter in an air-tight plastic bag or
sure that the filter is totally sealed.
To restore the air clfeaner to service:
1. Unwrap the HEPA filter.
2. Install a new activated carbon pre-filter.
3. Replace both filters in the air cleaner.
(see “Filter Replacement” section for proper
installation).
Technical Specifications
Diameter; 12.5 inches 31.8 cm
Height: 14.3 inches 35.8 cm
Weight: 8.1 lbs. 3.7 kgs.
Input Voltage; 120 Volts AC.
60 Hz
Ionization Voltage: 7500 Volts DC
Sears reserves the ri
specification without jht to change or modify any
notice.
REPLACEMENt PARTS LIST
Filter Replacement:
Charcoal Pre-fliter 83155
HEPA Filter 83154
Component Parts:
Power Head 83235-1
Base 83235-2
Locking Mecriknism 83235-3