Cisco 7912G - Manual (Page 15)

Business IP Telephony The Future is Now
Page 14 of 14
Customizing Phone Settings
You can personalize your Cisco IP Phone by adjusting settings, as described in the tables
below.
• If you want to restore your previously-saved settings on the phone, choose
Settings > more> Restore.
• If you want to restore these settings back to those originally stored on the phone
when it was manufactured, choose Settings > more > Factory. All your
previously saved changes will be reset.
Adjusting the Volume
The table below describes how to adjust and save volume levels on your phone.
If you want to...
Then...
Adjust the volume
level for a call Press the Volume button during a call or
after invoking a dial tone.
Doing so adjusts the volume level for the
currently active audio mode.
For example, if you increase the volume
while you are using the handset, you have
not affected the speaker volume.
Press Save to preserve the new volume as
the default level for this audio mode. If you
want your phone to keep this volume setting
even after a reboot, press the Menu button
and choose Settings > Save.
Adjust the volume level for the ringer Press the Volume button while the handset
is in the cradle. The new ringer volume is
saved automatically.
If you adjust the handset or speaker volume without saving the change, the
volume will revert to the previously saved level the next time you use that
audio mode.
Customizing Rings
You can change the sound your phone makes when it rings to suit your tastes and to help
you differentiate between your phone ringing and another nearby phone.
If you want to...
Then...