Note – White Rodgers 1F70 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
One some models, the timer is powered by an
alkaline or rechargeable Nicad battery. There is
a battery included in the thermostat models that
require one (see fig. 4). For shipping, a card
board strip has been inserted between the con
tact and the battery. TO START THE TIMER,
YOU MUST FOLLOW THESE STEPS TO RE
MOVE THE CARDBOARD STRIP!
1. Lift and grasp the tab on the cardboard strip.
2. Hold one finger on the battery to hold it in
place.
3. Gently pull the tab straight out. If the timer
does not start, remove the battery and re
insert it (see REPLACING THE BATTERY).
4. Replace the thermostat cover.
SET THERMOSTAT SWITCHES
AND TEMPERATURE LEVERS
NOTE
Turn on electrical power to system, if you have
not already done so.
10