Select setback-setup times, Note, Operating the thermostat – White Rodgers 1F70 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING THE THERMOSTAT
SELECT SETBACK-SETUP TIMES
The timer has been preset to lower (set back)
the temperature at 11 ;00 PM (with the BLUE
timer selector) and raise (set up) the tempera
ture at 6:00 AM (with the RED timer selector).
Additional sets of selectors are stored inside the
thermostat cover on some models. Use them if
you want more than one setback-setup time
period (you must use the selectors in pairs, one
red and one blue, for proper setback-setup
operation).
Refer to Table 1 for suggestions on how to set
timerselectors and temperature leversforproper
setup/setback operation.
If you want to use only the preset setback-setup
times, skip this section and go to SET AND
START THE TIMER.
NOTE
Depending on local weather conditions and the
temperature you select, it may take several
hours to cool to a desired temperature.
During the air conditioning season, you may
wish to maintain a highertemperature during the
day and a lower temperature during the night.
This may be even more desirable if no one is at
home during the day. In this case, set the red
timer selector to the AM time you want the house
temperature to rise to the high setting. Set the