Hunter 28837 46 Pemberley - Manual (Page 16)

r
Programming
Permanent Manual Override
To Return
To Program*
(’From temporary or permanent manual
override state)
NOTE: You can also return the current program by
pressing «HOLD TEMP” once in, permanent
override mode.
30-31
In the event you wish to hoid your manual override for
vacation or just an extended period of time, follow the
temporary manual override instructions on page 29,
then immediately press HOLD/CLEAR.
This will maintain override setting
Indefinitely, «HOLD" will, appear
on the display.
■ To return immediately to the current
program, press HOLD/CLEAR until
program number appears, "HOLD”
will disappear if you were in
permanent manual override.
Other Features
Temperature Span
Your thermostat is pre-programmed at the factory
to cycle when the temperature rises 1" above
The Energy Monitor
The Energy Monitor measures and stores the amount
of time the heating and air-conditioning system
operates. By pressing the key sequence shown, the
usage can be displayed for the present day, the
or V below the temperature setting; It cannot
be changed.
previous day, and the total. By monitoring on a daily
basis, you can gradually adjust winter or summer
temperature settings and monitor the effect of your
energy conserving efforts.
W Normal display of current time and room
temperature on Saturday.