Jjp to, Delay start operation – Amana Quiet Zone 7M11TA User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DELAY START OPERATION
Afofe; Changes can be made only while display Is flashing. You will have 5 seconds between each temperature,
operating mode, and fan speed selection. If a selection is not made during this time frame, the unit will select the default
and proceed to the next step: Setting the delay time. If you wish to reset a missed selection, press the DELA Y TIMER
button and begin again.________________________________________________________________________________
Procedure
Button
Display Indicator
Turn the unit off.
Q
o Press the DELAY
^ TIMER button.
\ I / Í /
DELAY
TIMER
/ WKKKKKm \
//1
The current temperature setting will flash.
O Select the desired
^
temperature,
operating mode, and
fan speed.
\ 1 / f /
// I
Display and selected setting lights will flash.
The display will show the current temperature
setting.
Press the DELAY
’TIMER button.
\ l / / /
//1 M
The current delay time will flash.
jr Change the delay
time, if desired.
VSET A
Note: The minimum setting for the timer is 1 hour
// I M
JJp to.
Y
// I
0Press
the
DELAY
TIMER button to start
the time or select
nothing and the unit
will start automati
cally.
DELAY
TIMER
The display will show the countdown time to
activation.