The foot hemmer, Applications, Hemming – SINGER 401A User Manual
Page 85
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
67
THE FOOT HEMMER
# # # # # :^
The narrow hemmer
forms and stitches a per
fectly turned hem with
out basting or pressing.
It is attached to the ma
chine in place of the
regular presser foot.
APPLICATIONS
Fine hems
Edging ruffles
Sheer seams
Hemming with lace
Lace insertion
Lingerie finishes
SELECTOR: AK
RED LEVER: 3
THROAT PLATE: GENERAL PURPOSE
FOOT HEMMER
HEMMING
Set Selector and Red Lever . At the very edge
of the fabric form a double fold. Crease this
fold for about 2". Dr^w the bobbin and needle
threads under the hemmer. Place the fabric under
the foot and stitch through the creased fold for
several stitches. Hold the thread ends in the left
hand and guide the raw edge in front of the
hemmer evenly into the scroll. Sew slowly, still
hoidingThread ends until the hem is well started.
Soft fabrics will enter the scroll best with the
foot down; firm, crisp materials with the foot
raised.
Even feeding is essential to good hemming.
The same width of fabric must be kept in the
scroll of the hemmer at all times. A little practice
will result in perfectly formed hems.