Changing shooting functions, P. 109), Turning off the af assist beam – Canon A1100 IS User Manual
Page 109: Turning off the red-eye reduction function
109
If you set the mode dial to
G, you can change the settings in the 4 tab
Turning off the AF Assist Beam
If the camera cannot focus in low light conditions when you press the shutter
button halfway, the lamp will automatically light to assist focusing. You can
turn off the lamp.
●
Select [AF-assist Beam], then press the
qr
buttons to select [Off].
Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
●
Select [Flash Settings], then press the
m
button.
●
Press the
op buttons to select [Red-Eye
Lamp], then press the
qr buttons to select
[Off].
Before attempting to shoot using a function explained in this chapter in
modes other than
G mode, check if the function is available in those
modes
Changing Shooting Functions