Canon A1100 IS - Manual (Page 71)

71
You can change the tone of an image to sepia or black and white when
shooting.
Select My Colors.
● After pressing the m button, press the
op buttons to select .
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting you select will display on the
screen.
Custom Color
The contrast, sharpness and color saturation in an image can be selected
and set from 5 different levels.
● Select in Step 2 above and press the
l button.
● Press the
op buttons to select an option,
then use the qr buttons to select a value.
● The more to the right, the stronger/deeper
the effect gets, the more to the left, the
weaker/lighter the effect gets.
● Press the l button to accept the
setting.
Changing the Tone of an Image (My Colors)
My Colors Off —
Vivid
Emphasizes the contrast and color saturation for a vivid
impression.
Neutral Tones down the contrast and color saturation for neutral hues.
Sepia Sepia tones.
B/W Black and white.
Custom Color You can adjust the tone of the image to your preference.
The white balance cannot be set in the and modes (p. 70) .