Cambridge Audio Azur 640T - Manual (Page 6)

6 azur DAB/FM tuner
AC ppower ssocket
Once all connections have been made, plug the AC Power Cable into an
appropriate mains socket. Your 640T is now ready for use.
Natural C Contour TTechnology
This switch is used to select two types of subtle tone settings, either
Warm or Lively. The default position is off (flat frequency response).
Audio IInput
Allows another unit (such as an analogue radio) to be connected through
the 640T to your amplifier, saving an input on your amplifier. To listen to
the unit connected, put the 640T into standby.
Aerial
Input
50 Ohms
F-Type
Aerial
Input
50 Ohms
F-Type
"Lively" Of f "Warm"
"Warm" Off "Lively"
See Manual for details
Aux Tuner
Input
Aux T uner
Input
Optical
Optical
S/P DIF Co-axial
S/P DIF Co-axial
REAR PANEL CONNECTIONS
Audio O Output
Connect to your amplifier here using phono cables (2RCA-2RCA).
Digital AAudio O Outputs
Both S/P DIF Co-axial and Toslink Optical connectors are fitted for
connection to a digital recorder e.g. Minidisc, CDR etc or an offboard
digital to analogue convertor (DAB only).
Aerial
The 640T has an F-type screw connection aerial for both FM and DAB
signals (supplied).
Extend the lead and attach it to a window frame or wall, or move around
the room, where reception is best
In an area where signals are weak, it may be necessary to use a 75 ohm
unbalanced-type outdoor antenna.