Cambridge Audio Azur 640T - Manual (Page 9)

640T DAB/FM tuner
azur DAB/FM tuner 9
USING THE REMOTE HANDSET
The 640T is supplied with a system remote control that operates both
this Tuner and the Cambridge Azur amplifiers.
Power
Switches the 640T between Standby mode and On
mode. The Blue LED on the front panel of the 640T
indicates that it is On when bright and in Standby
when dim.
1 - 1 10 kkeys
These allow access to any stored presets you might
have saved on the 640T.
Info
Displays information such as music genre and
station provider. The information on the FM band is
dependant on the strength of the signal.
DAB/FM
This button switches between the DAB and FM
bands that the 640T is capable of receiving. The
display will show "Switching to …".
Select
Confirms DAB station, alarm and sleep Choices.
Step < < > >
For use with Manual Tuning, Alarm, Sleep, and Clock settings. Will also
cycle through the alphabetical list of stations in the DAB band.
Alarm
This button is used to access the Alarm and Sleep menus as discussed
in the Operation section.
Bright
Switches the display brightness between low and high.
Please nnote tthat tthe ffollowing bbuttons w will oonly ooperate aa m matching
Cambridge AAzur AAmplifier.
Mute
This button mutes the audio. The mute mode is indicated by the channel
LED flashing.
Volume + +/-
The volume buttons increase and decrease the Volume of the amplifier
output.
Channel S Select
The five channel select buttons and the Tape monitor select button are
used to change the input source (CD, DVD etc).
C
Select
Vol +
Vol -
Alarm
Mute Info DAB/
FM
CD Tuner DAB
DVD
Aux Phono
AV
MD
Tape
Mon
Bright