SINGER 15-90 User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Adjust the Ruffler for Group Plaiting;
(1) To make the space between the groups of plaits,
raise the adjusting lever E and move it until
the projection D can be entered in the small
slot indicated by the star on the adjusting lever
E. The ruffler will then stop plaiting and plain
stitching will be made.
62
F
ig
.
71.
G
roup
P
laiting
with
the
R
uffler
(2) When the desired space is made, set the projec
tion D in either of the slots 6 or 12.
(3) Insert the material to be plaited between the two
blue blades Line 2, Fig. 72.
MATERIAL
F
ig
. 72.
C
orrect
P
osition
for
the
M
aterial
TO OIL THE RUFFLER
Occasionally apply a drop of oil to the working
parts of the ruffler at each of the places indicated
in Fig. 71.