SINGER W311 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
17
(6) Push buttonhole control as far to the right as possible. It will then latch into position
for bar tacking. Sew four or five stitches, Step 2.
(7) Push buttonhole control
down slightly and manually move to position between Num-
3ers 1 and 3, being sure it is against the Stop.
This will set the machine to sew in reverse.
(8) Push buttonhole control as far to the right as possible, it will then latch into
position for bar tack. Sew four or five stitches, Step 4.
(9) Set buttonhole control at 0 position, extreme left, and
take two or three stitches
to fasten bar tack to prevent ravelling.
(10) Cut the buttonhole opening with
ripper, being careful not to cut the stitching.
\
V
k
if you plan to make buttonholes on sheer or soft material, place tarlaton or
paper under fabric which can be torn away after stitching.
When making additional buttonholes, be sure to return the buttonhole control
lever to 0 and back to the number 1 position to put the machine in forward
stitching.