SINGER W311 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
INSTALLING SEWING HEAD IN CABINET
49
1
. Back off both head hinge set screws
until head hinge hole is clear.
2. Tilt head hinge tongues up and back
as far as they will go.
3. Carefully slip head onto head hinges
- - making sure tongues are inserted
as far as they can go into head
hinge holes.
4.
Allow the head to rest in its tilted-
back position.
5.
Tighten both set screws securely
with screw driver.
6. Plug electrical leads into sockets
located inside cabinet. Cord identi
fied with “motor” tag must be plugged
into socket marked “motor”.
Untagged cord goes to “light”
socket.
See Fig.' 104
LIFT FLAP
Advertising