4. adjustment of the presser foot pressure – SINGER WSL7234 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(2) Ending of sewing
Make chain-stitches at the end of the sewing to
prevent the thread from untying and to prepare for
the next sewing.
Draw the finished fabric gently backwards and to
the left as the machine is operating and make
chain-stitches. This is called chain-stitch sewing.
Then cut the thread 2 ~ 5cm (1-2") from the pres -
ser foot.
* Do not pull it out roughly as the
needle
will
bend and break.
3-4. Adjustment of the Presser Foot
Pressure
The presser foot pressure is pre-adjusted for
materials of medium (standard) thickness.
Adjustment is necessary only when you work on
very thin or very thick materials.
Accordingly, sew thinner materials with less pres
sure and thicker materials with more pressure.
Increase the pressure of the presser foot by
tightening the adjustment screw.