Three thread overedging stitch using one needle – SINGER WSL7234 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
4. THREE THREAD OVEREDGING
STITCH USING ONE NEEDLE
Though this machine is made mainly for 4 thread
stitch overedging using 2 needles, three-thread
stitch overedging using 1 needle can be easily
operated by just removing 1 needle.
(1) By removing the right needle.
Three-thread overedging stitch using 1 needle for
as wide as a 4-thread overedging stitch using 2
needles can be achieved.
Use the left thread tension. (Dial CD ). The bite
width is normaly 4.5 mm.
(2) By removing the left needle.
The right needle sews with a narrow width bite.
Use the right thread tension. (Dial
2
,; ) The bite
width is normaly 2.5 mm.
Advertising