Transmission belts removal – Asus 136-480A User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FIGURE 27. REMOVING MOWER BELT
Step 4. Place the lift lever in the engaged
position. See figure 10.
Step 5. Unhook the tension springs on both
sides of the deck. See figure 27.
FIGURE 28. REMOVING TENSION SPRINGS
Step 6. Remove the front four deck links from the
cutting deck. See figure 29.
Step 7. Remove the belt guards from both deck
pulleys. See figure 29.
,r-
'i, .It»'.'"
■f
Deck,;, ■ ■
Links'“'...'
“t'
Deck Boll
.0'
. V*-
FIGURE 29. DECK LINKS
TRANSMISSION BELTS
REMOVAL
Step 1. Place the lift lever in the disengaged
position. See figure 10.
Step 2. Remove the belt keeper and large bolt on
the engine pulley. See figure 26.
Step 3. Unhook the belt from the engine pulley.
See figure 27.
Step 4. Place the lift lever in the engaged
position. See figure 10.
Step 5. Unhook the tension springs on both
sides of the deck. See figure 28.
Step 6. Remove the front four deck links from the
cutting deck. See figure 29.
Step 7. Tip the deck down as shown in figure 29.
NOTE
Leave the belt attached to the deck
pulleys unless you want to replace
it.
Step 8. Remove and. replace the belt and
reassemble.
Step 8. Remove the engine belt guard by
removing the two front engine mounting
bolts. See figure 30.
14