2 ✱ presses, 3 ✱ presses, 4✱ presses – CLIFFORD cyber Arrow 3 User Manual

Page 9: 5 ✱ presses, 6 ✱ presses, 7✱ presses

Advertising
background image

Ta ble of User- Selectable Fea tures

Feature Select

1 blank press

2 blank presses

3 blank presses

4 blank presses

1 ✱ press

Add a new remote control

NOTE 1

Chirps: off/on

(1/2 chirps)

AutoArming: off/on

NOTE 5 — Other vehicle‘s remote:

arm/disarm (1 then 2 chirps)

2 ✱ presses

Personalized Siren Sounds*/**

NOTE 2

NOT USED

Lock upon AutoArming: off/on

NOTE 6 — Other vehicle‘s remote:

trunk release* (2 chirps)

3 ✱ presses

Play Personalized Siren Sounds*/**:

trigger only/always (1/2 chirps)

Remote valet mode via

button combo

+

: off/on

AutoArming entry delay: off/on

NOTE 6 — Other vehicle‘s remote:

silent arm and disarm (3 chirps)

4

presses

Siren duration: 30/60/90sec.**

(1/2/3 chirps)

AutoStart*: both off/both on/temp

only/battery only (1/2/3/4 chirps)

FACT: off/on

NOT USED

5 ✱ presses

AutoLock: off/on

NOT USED

NOT USED

NOTE 6 — Other vehicle‘s remote:

remote engine starting* (5 chirps)

6 ✱ presses

AutoUnLock: off/on

Clear all remotes

NOTE 3

NOT USED

NOTE 6 — Other vehicle‘s remote:
window rolldown/venting* (6 chirps)

7

presses

Reset all features (except remotes

and valet code) to factory settings

Set a new secret valet code

NOTE 4

NOT USED

NOTE 6 — Other vehicle‘s remote:

remote valet mode (7 chirps)

* Re quires op tional wir ing or ac ces sory; ask your Clif ford Dealer for de tails.

**Not avail able on Euro pean mod els in com pli ance with EC95/56

NOTE 1: Press the

button of the new remote. You’ll hear one chirp. Press the

button again. You’ll hear two

chirps to confirm that the new remote control has been added.

NOTE 2: This feature requires the optional Self-Powered SmartSiren 4. If so equipped, selection of this feature will
cause the system to sound a few seconds of siren sound #1. Press the blank button to turn on this sound or the

button to turn it off. The system will then sound a few seconds of sound #2. Repeat: blank=ON, =OFF for each of the
six sounds.

NOTE 3: You’ll hear two chirps to indicate all remotes have been cleared from memory. You must now add
new/existing remotes with the “Add new remote control” feature and/or the “Other vehicle‘s remote” feature.

NOTE 4: Immediately PRESS THE BLANK BUTTON, THEN enter your new code,

wait for the two chirps, then turn off the

ignition (you’ll hear 3 chirps to confirm program mode exit). You MUST now turn the ignition back on and then
re-enter your new code. If the LED flashes on, your new code has been accepted. If the LED does not light, the two
codes did not match and the system has reverted to your previous code.

NOTE 5: Lets you arm/disarm with the remote control of a G4 system on your other vehicle(s). For instance, to set the
button of the other car’s remote to arm and disarm this system, select column 4, row 1, then press the button of the
other car’s remote (you’ll hear one chirp). Immediately press the
button again (you will hear a 2-chirp
confirmation). The
button of the other vehicle’s remote will now arm/disarm this system.

NOTE 6: The features in this column allow you to control your system with the remote control of a G4 system on your
other vehicle(s). Just select the function you wish, then press the unused button or button combination on the other
remote that you want to use to perform that function on this system (you will then hear a the chirps noted). NOTE:

You

must first set a button or button combination on the other car’s remote that will arm/disarm the system (column 4, row
1) before these others will be accepted.

Life time lim ited fac tory war ranty terms & con di tions

Clif ford ve hi cle se cu rity sys tems and ac ces so ries re quire pro fes sional in stal la tion by an Authorized Clif ford Dealer. Un less the sys tem is sold and in stalled by an

Authorized Clif ford Dealer, all prod uct war ran ties and guar an tees are void. (UK: This does not affect your statutory rights.) As the manu fac turer, Clif ford

Elec tron ics war rants to the origi nal con sumer pur chaser, the sys tem con trol unit and re mote con trols to be free from de fects in ma te rial and work man ship for as

long as you own the ve hi cle in which the sys tem was origi nally in stalled. All other parts of the sys tem and ac ces so ries to the sys tem are war ranted to be free from

de fects in ma te rial and work man ship for one (1) year from the date of pur chase. Clif ford Elec tron ics will re pair or re place, at its op tion and free of charge dur ing

the war ranty pe riod, any sys tem com po nent that proves de fec tive in ma te rial or work man ship un der nor mal in stal la tion, use, and serv ice, pro vided the prod uct

is re turned to our fac tory by an Authorized Clifford Dealer, trans por ta tion charges pre paid. Prod ucts re turned to our fac tory must be ac com pa nied by a

pho to copy of the pur chase re ceipt. In the ab sence of such pur chase re ceipt, the war ranty pe riod shall be one (1) year from the date of manu fac ture. Any dam age

to the prod uct(s) as a re sult of mis use, abuse, ne glect, ac ci dent, in cor rect wir ing, im proper in stal la tion, de struc tion or al tera tion of the se rial number, re pair or

al tera tion out side our fac tory, or any use vio la tive of in struc tions fur nished by us will void the war ranty. This war ranty is lim ited to de fec tive parts and

spe cifi cally ex cludes any in ci den tal or con se quen tial dam ages con nected there with. This warranty is not transferable. Clif ford Elec tron ics makes no war ranty

against theft. This war ranty is not to be con strued as an in sur ance pol icy against loss. War ranty on in stal la tion la bor, re moval and re in stal la tion charges are not

the re spon si bil ity of Clif ford Elec tron ics, Inc.

9

Advertising