4 compartment floor cutouts, Compartment floor cutouts – Generac Power Systems 004270-1 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Section

2

- Installation

INSTALLATION

QUIETPACT™

75D

Recreational Vehicle Generator

Figure 2.5 - Typical Noise Abatement

• 2.2.4 COMPARTMENT FLOOR CUTOUTS

You must provide openings in the generator compart­

ment for the following items (Figure 2.6):

• Engine exhaust and cooling air outlets
• Generator cooling air inlet and front service door

Four holes for passage of generator mounting

bolts. See Section 2.1.4 (Page 23)

• Rear service door.

DANGER

Fuel lines and exhaust piping must not pene­

trate into the vehicle living area.

Figure 2.6

-

Compartment Floor Cutout

NOTE: FDR A FULL SIZE TEMPLATE, CONTACT GENERAC

SERVICE DEPARTMENT AT: 1-262-544-4811

Generac* Power Systems, Inc. 25

Advertising