Hunter PRO-C (PCC) - Manual (Page 33)

33
Hidden Features
(continued)
Solar Sync Delay for Pro-C
The delay feature is accessible only after the installation
of the Solar Sync. The Solar Sync Delay feature allows the user
to postpone seasonal adjustment changes from being made
by Solar Sync for up to 99 days.
While the Solar Sync Delay is active, the Solar Sync will continue
to collect and store data.
Operation:
To access the Solar Sync Delay setting:
1. Place the dial in the RUN position; press and hold the j
button, rotate the dial to the Solar Sync position then release
the j button. The following screen will be presented:
d:XX
(where d indicates days and XX indicates the number of days
to be delayed) .
2. Press the j or k button to increase/decrease the number
of days the delay should run. Once the desired number of days
is displayed, move the dial back to the
RUN position to activate
the delay.
NOTE
The number of days remaining will not be displayed on the RUN
screen. To check if the Delay feature is active, open the Solar Sync
Delay menu and check the days displayed. If 1 or more days are
displayed, then Solar Sync Delay is active, if 00 is displayed then
Solar Sync Delay is not active.
To change the existing Delay days setting:
1. Open the Solar Sync Delay menu by pressing the j button
and rotating the dial to Solar Sync Settings and release the
j button.
2. Use the j or k keys to modify the number of days until
desired numbers of delay days is displayed. (Setting the days
to 00 turns Solar Sync Delay to
OFF.)
3. Return the dial to the RUN position for the changes to
take effect.
While Solar Sync Delay is active, the Solar Sync will continue
to gather weather information and calculate the Seasonal
Adjust Value. The updated seasonal adjust will be applied once
the Solar Sync Delay days reach 00.
Solar Sync Delay