CDA SV430 - Manual (Page 12)

Care and Maintenance
Clean the panes of glass using a soft sponge and washing up liquid.
Do not soak the glass in water.
Do note use abrasive cleaning products, metallic scrapers or
scouring sponges. These could scuff the surface and cause the
glass to shatter.
Rinse with clean water and dry off with a lint-free cloth.
Replace the clean panes in the door, taking care to slot the frame
under the spigot next to the hinge, as shown in figure 11.
Reattach the frame by tightening it against the door until the
frame clicks into place.
Do not push down on the door itself as this may damage your
oven.
Finally remove the red stoppers from the hinge slots.
Fig. 12
Fig. 13
Fig. 11
CLAC
CLAC
11