CDA SV430 - Manual (Page 15)

Mains Electricity Connection
Warning! This appliance must be earthed
We recommend that the appliance is connected by a qualified electrician, who is a
member of the N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.
This appliance is intended to be connected to fixed wiring and is not suitable for
connection to a 13A plug or 13A supply.
This appliance is intended to be connected to fixed wiring by a double pole switch,
having a contact separation of at least 3mm in all poles. The switch must be positioned
no further than 2m from the appliance.
This appliance is supplied with a 3 core mains cable; the wires are in accordance with the
following code:
Green and Yellow = Earth
Blue = Neutral
Brown = Live
Please note:
• The mains cable must only be replaced by a qualified electrician or service engineer
and must be of equivalent or better rating (i.e. 1.5mm 2 , HO5V2V2-F).
• The marking of the current rating of the fuse or circuit breaker protecting this appliance
should be marked on the socket outlet (16A).
• Assembly and electrical connection should be carried out by specialised personnel.
• When installing this product we recommend you seek the help of another individual.
• The mains isolation switch must be accessible after installation.
Fig. 15
N L
Blue
Brown
Green/yellow
14