Cobra Electronics CP-9135 - Manual (Page 16)

27 26
Access a line.
Memory Number Dialing Memory Number
Dialing
1
Push and release button once. 2
Pushand release keypad number, (0-9), you
assigned for that phone number. The phone
will dial that number automatically. 3
Operation Operation
Note
Memory dialing from base uses
same procedure as handset.
To Find The Handset
The handset can be located when it’s away from
the base. To locate the handset:
To Find The
Handset
Push and release button.
The handset will beep for 30 seconds,
allowing time to locate the handset.
If you wish to stop beep tones push and
release
or buttons, wait 2 seconds,
push and release again or, push and release
button on base.
1
2
Memory
Page/Find
Talk
Intercom
Intercom
Page/Find
CP9135 manual layout.6 10/20/98 12:41 PM Page 32