Cobra Electronics CP-9135 - Manual (Page 23)

To Remove The Belt Clip And
Install The Slot Cover
Cleaning The Charging Contacts
Clean the two metal charging contacts on both
base and handset with a soft dry cloth on a
regular basis.
Headset Operation
The headset jack allows use of a headset with
an earspeaker and boom microphone.
41
Spread Right Page Spread Left Page
40
1
Use the belt clip for
convenience.
Operation
Cobra Customer Service
773.889.3087
24 hours a day,
seven days a week
Operation
Clean base contacts.
Cleaning The
C h a r g i n gC o n t a c t s
1
2
Headset
Operation
1
Plug the headset
into the CP-9135
handset. 2 3
3. Put the slot cover in
the slot and press
down.
1. Push the belt
clip lock tab
as shown.
2. Pull the belt
clip up and
out of the
handset.
Note
Isopropyl alcohol may be used
for more thorough cleaning.
Clean handset contacts.
Position the
headset com-
fortably on your
head and adjust
the microphone
so it is located
near, but not
touching, your
mouth.
CP9135 manual layout.6 10/20/98 12:41 PM Page 46