SoundMax SM-CMD3000 - Manual (Page 11)

11
General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press REL button, then press the RESET button to restore the unit to the original factory settings.
Power button
Press the PWR button to switch the unit on. Press and hold it to switch the unit off.
Note: After the unit is off, volume level and radio current settings will be memorized, and when you turn
the unit on it will resume the stored status you set.
Volume control
Rotate VOLUME knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume
level. OR press the VOL +/- buttons on the RC to adjust the volume level.
Audio settings adjustment
Press SEL button shortly and repeatedly to select the mode: VOL => BAL => FAD => BAS => TRE. Rotate
the MENU-VOL knob or press VOL+/- buttons on the RC to adjust each mode.
NOTE: Adjustments to Bass and Treble will override any preset EQ (Preset Equalizer Curves).
In each mode, the waiting time is about 3 seconds, and the waiting time is over, it returns to the last
display mode of radio or disc playback mode.
Setup menu
1. Press and hold for 2 seconds the SEL button on the panel to enter the setup menu.
2. Rotate the MENU-VOL knob to select the setting: AUDIO => VIDEO => SOURCE SEL => PREFERENCE
=> EXIT.
Audio settings: you can adjust: Balance, Fader, Bass, Treble, Equalizer, Loudness, Back.
Video settings: you can adjust: Bright, Contrast, Color, Hue, Wide, Default, Back.
Source select: you can select: Radio, USB, DVD, AUX, Back.
Preference settings: you can adjust: Clock system, Clock adjustment, Key beep, Back.
3. Briefly repeatedly press SEL button (volume regulator) on the panel or ENTER on the RC to open the
setting adjustment window.
4. Rotate the MENU-VOL knob or press buttons on the RC to adjust the setting.