SoundMax SM-CMD3000 - Manual (Page 14)

14
Preset scan
Select a band. Press AMS button to scan all preset stations in the memories of the current band and stay on
each memory stations for about 7 seconds. To stop preset scan, press the button again.
Number Buttons
During radio mode, Number Buttons from 1 to 6 can help you store your favorite station. You can follow the
Steps below:
When receiving a station, press and hold any Number Button until CH appears on the LCD, which indicates
that station is already stored in the corresponding number button. You can store up to 24 FM stations
(6 each for FM1,FM2,FM3,FM4), up to 12 AM stations (6 each for AM1/MW and AM2/LW).
Radio setup menu
1. During Radio mode press the SETUP button on the RC to enter the setup menu.
2. Press the buttons to select the desired mode: Stereo => Local => RDS AF => RDS TA => Region
=> RT scroll => TA volume => Exit.
Stereo: you can select: ON, OFF.
Local: you can select: ON, OFF.
RDS AF: you can select: AF ON, AF OFF.
RDS TA: you can select: TA ON, TA OFF.
Region: you can select: REG ON, REG OFF.
RT scroll: you can select: SLOW, NORMAL, FAST.
TA volume: you can select: LOW, NORMAL, HIGH.
3. Press ENTER to open the mode settings list.
4. Press buttons to select the setting.
5. Press ENTER to confirm the setting.
6. Select EXIT to exit settings list window.
Stereo/Mono mode
Press the ST/AUDIO button repeatedly on the RC to select Stereo or Mono mode.
Local/Distant mode
Press the LOC/SUB-T button on RC or LOC button on the panel to select Local or Distant (DX) tuning mode.
Local mode improves reception in some areas where the signal is too strong.