Cobra Electronics XR-1050 - Manual (Page 11)

Operation
15
Operation
14
Selecting Manual Muting Mode
(from Auto mode)
In Manual Mute mode the alerts will always be
heard at the set volume level.
Press and release Mute Button when no signal
is being received. AUTO, MUTE, OFF will appear on
the display for 2 seconds, then disappear.
1
AUTO, MUTE, ON will appear in display for 2 seconds,
then disappear. All future alarms will be Auto Mute.
A U T O
M U T E
Muting
PRESS &
RELEASE
Press and release Mute button when no
signal is being received.
1
Selecting Auto Muting Mode
(from Manual mode)
In Auto Mute mode the alerts will be heard at the
set volume for 3 seconds, then automatically be
reduced to a lower level.
In Voice Alert™, the message “AutoMute”
will be heard.
Voice Alert™
The Voice Alert™ message will stay on for
2 seconds.
M O D E
V A
O N
Voice/Tone Settings
Press and hold MUTE button for two seconds
to change between Voice and Tone Alarms.
In Tone Setting, TONE , MODE, ON, will be
displayed and a beep will be heard.
1
Tone Alarm
And Voice
Alert™
PRESS &
RELEASE
In Voice Alert™ setting, the message “Voice Alert”
will be heard and VA, MODE, ON, will be displayed.
Note
The factory default mode
seting is Auto Muting.
Note
Voice Alert™ is the factory
default setting.
O N
T O N E