Operation, Turning on your xr-1050, T e s t – Cobra Electronics XR-1050 User Manual
Page 8: V o l 8
8
Operation
9
Turning
On Your
XR-1050
Turning On Your XR-1050
Plug power cord into
detector.
Plug power cord into
cigarette lighter.
2
Press the Power Button.
1
3
In both tone and voice modes, the unit will announce
“Testing” and the message TEST will be displayed. The
display shows four typical alerts – X, Laser, VG2,
Emergency Vehicle and announces “System Ready”.
The system indicates if Voice Alert™ or Tone only mode
has been selected and if VG2 audio alert is turned on
or off.
T E S T
L
A
Z
E
R
E
Y
E
B
A
N
D
L
A
Z
E
R
E
Y
E
Operation
Set Volume
Adjust the volume up or down using the volume
rocker switch on side of unit.
+
-
The volume control has 8 volume settings, levels 0-
8. As the level is increased, “Voice Alert™”or the
beep tone will allow you to hear the volume level.
At level 8 a “beep beep”is heard indicating
maximum volume.
CITY
V O L 8
Note
Pressing the volume up
button while you turn on
unit will show all 10 Alerts
with their Tones.