Cecilware IWC-25A - Manual (Page 4)

7. Immediate clean up is recommended when water is left on the top plate.
OPERATION INSTRUCTION
1. Plug power cord into 240V dedicated circuit.
2. Turn on power by pushing the power on / off key, power level display LED will light on.
3. Put a suitable / recommended wok-pan in the middle of the induction wok cooker.
4. Rotate the rotary knob to select power level: Level 1 (minimum) to Level 9 (maximum).
5. The Heating Indicator Light will indicate if the wok pan is suitable or not. If the light is on,
then the wok is heated. If the light is off, it indicates that the power is on, but no wok or no
suitable wok is on the glass top.
6. This unit is equipped with an Over Heating Protection Device, which will stop power
temporarily. Should this occur, the Heating Indicator Light will flash to indicate the Over Heating
Protection function is on. Then, if it lasts for more than 60 seconds, then the induction wok
cooker will automatically shutoff.
CONTROL PANEL,
1. POWER on/off button
2. HEATING Indicator Light
3. POWER LEVEL indicator (showing from 1 ~ 9 power levels)
4. ROTARY KNOB to select power levels
1
2 3
4