Cecilware corporation – Cecilware IWC-25A User Manual
Page 7
SPECIFICATION:
Model No.
IWC-25A Induction Wok
Voltage
240V ~ 60Hz
Vitro-Ceramic Wok
Diameter: approx. 12.75”
Electrical Power
Consumption
Max. 2,500watt
Safety Device
z
Over Time Protector (2 Hrs.)
z
Automatic Safety Shut-Off
z
Material Compatibility Detector
z
Small Object Detector
z
Overheating Protection Device
z
IC Auto Reset.
Dimension
15.16” x 16.61” x 6.30”
(including rubber-foot stand)
38.5cm x 42.2cm x 16cm
(including foot stand
height)
TROUBLE SHOOTING
1. If your induction wok cooker seems to be working improperly, it doesn't necessarily mean it's
faulty. In all cases, check the below points.
2. If you fail to identify the problem, contact the after-sales service immediately.
Problem Resolution
No indication light when power "on"
Cable/terminal block is loose
Tripped circuit or fuse; or automatic switch in your house
Power supply stopped
Heating indicator does not light-up,
Unsuitable cooking utensil
Appliance fails to heat up
Utensil is located at the center properly
Utensil is smaller than 5cm
Over-heating protection is activated
Appliance suddenly stops heating
during Operation
Temperature became too high
Air entrance or outlet blocked
Over-heating protection activated
Cecilware Corporation
43-05 20th Avenue
Long Island City, NY 11105
Tel: 800.935.2211, 718.932.1414
Fax: 718.932.7860
Technical Support
Customer Service:
www.cecilware.com