Cambridge Audio KP10 - Manual (Page 14)

14 Incognito KP10
OPERATING INSTRUCTIONS
Important!
As mentioned previously, the KP10 can be switched between two modes of operation; a
standard A-BUS mode for compatibility with other manufacturers A-BUS Ready equipment
(Standard A-BUS/Incognito Ready mode), and an Incognito A-BUS hub mode (AH10 mode).
When used with other manufacturers A-BUS Ready equipment the keypad MUST be switched to
“Standard A-BUS/Incognito Ready” mode or they will not work.
Volume adjustment
Volume is adjusted using the volume up and volume down buttons on the keypad or remote; this
is indicated on the keypad by the intensity of the blue LED lights, there are four levels of intensity.
Source selection
The Source left and right buttons allow you to choose from multiple connected sources. The LED
display will indicate which source is selected.
Sound adjustment modes
Pressing the Power/Standby button while holding the Volume down key activates the sound
adjustment modes, the four central LEDs on the keypad will then light in sequence to indicate
each of the four sound adjustment modes; Bass, Treble, Balance and Fader. These modes can
also be activated using the 'Select' button on the remote control.