Technical specifications – Cambridge Audio KP10 User Manual
Page 18
18 Incognito KP10
Input impedance
45 k ohms
Frequency response
20Hz – 20kHz +/- 1dB
THD
<0.2% @ 1W, 20Hz – 20 kHz
S/N ratio
> 80 dB ‘A’ weighted
Volume control range
- 80 dB, 36 steps
Bass control range
+/- 16 dB, 2 dB steps
Treble control range
+/- 16 dB, 2 dB steps
Balance control range
+/- 40 dB, 9 steps either way
Preamp output
Variable level, follows volume setting
IR pass through
34–40 kHz and 54–58 kHz
modulation frequencies supported
Speaker impedance
4–8 ohms
Power requirement
24 V DC @ 1A max (supplied by hub)
This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully
checked for accuracy at the time of printing; however, Cambridge Audio's policy is one of continuous improvement, therefore design and
specifications are subject to change without prior notice. If you notice any errors please feel free to email us at:
This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. All
trademarks and registered trademarks are the property of their respective owners.
Incognito and Incognito Ready are trademarks of Cambridge Audio Ltd. All rights reserved.
© Copyright Cambridge Audio Ltd 2005
A-BUS and A-BUS Ready are registered trademarks of LeisureTech Electronics Pty Ltd Australia.
TECHNICAL SPECIFICATIONS