CITIZEN CT-S2000L - Manual (Page 32)

— 29 —
Black Mark (printed on the reverse)
b) Black mark paper (BM paper)
Cut position
Paper feeding
direction
Printable area
Unit: mm
CAUTION!
■ PCS value of black mark must be 0.9 or more.
■ When using the black mark paper, consider the margin of +/- 2 mm for the print position
against the standard position and maximum -5% for print length.
■ Refer to the above drawing for the printable area and have enough margings specified
in the marks E and G. If the print data size is out of the printable area, the printer
should skip to next page.
Dimensions
BM1 BM2 BM3
A Right edge of black mark 13.5 or more 57.5 or more 80.5 or more
B Left edge of black mark 1.5 or or less 45.5 oror less 68.5 or or less
C Black mark height 5
D Cut position in black mark 2.5
E Top margin 6.5
F Black mark pitch 30 to 300
G Bottom margin 9
Mark Item