Product features, Advanced operation, Noaa all hazards/weather radio and alert, w/same – Cobra Electronics MR F80B-D User Manual

Page 24

Advertising
background image

Introduction

Nothing

Comes Close to a Cobra

®

Product Features

41

Advanced Operation

Advanced Operation

There are several features in the CobraMarine MR F80 VHF

radio that provide quick access to the voice calling channels

and allow monitoring more than one (1) channel at a time.

Channel 16/9

This function provides quick access to calling Channel 16 or

Channel 9 from any operational mode.
To Switch to Channel 16 or Channel 9:

1.

Press the Channel 16/9 button to change to Channel 16.

2.

Press the Channel 16/9 button again to change to

Channel 9.

3.

Press the Channel 16/9 key again to go back to the

original working channel.

When on Channel 16 or Channel 9 in the Channel 16/9 mode,

turn the Channel Knob, press the Channel Up/Down button

on the microphone or press the Function (F1/F2) button to

change to other channels.

Operating Your Radio

40 English

Product Features

Introduction

NOAA All Hazards/Weather

Radio and Alert, w/SAME

NOTE
The Weather channels may be turned Off, while

the SAME area code alerts are On or any combination

of On or Off.

5.

Turn the Channel knob to select EDIT. Press Enter

button.

6.

Turn the Channel knob or press the Function (F1, F2)

buttons on the radio to select the SAME alert code

number (1-10) you wish to program.

7.

Press the Enter button to start entering the SAME code

number. First number entry location will start to blink.

8.

Turn the Channel knob or press the Channel Up/Down

buttons on the microphone to enter the six (6) digit
SAME

code number you want to enter.

9.

Use the Function (F1, F2) buttons on the radio to move

to the next or previous number. Repeat steps 7 and 8

until all six digits have been entered.

10.

Press the Enter button to complete the code entry.

11.

Move the selection arrow to NEXT to set another SAME

alert channel. If desired. Ten total codes can be

programmed.

12.

When the changes are complete, exit the WX/SAME

menu and return to the Setup menu.

Operating Your Radio

SAME Codes and Edit List

SAME Event Code Alert

Channel 16/9 Toggle

Channel 16/9 Button

Microphone 16/9 Button

MRF80BD_MANL_OPER:F75-Operation-8 12/9/10 10:35 AM Page 40

Advertising