Beko 4710 TBA - Manual (Page 23)

Oven-Mounting and Warnings
Things to Pay Special Attention to Regarding the Electrical
Connection
- Have the device's electricity connected by a certified electrician.
- This device belongs to the primary protection class and must be
operated only via a grounded electrical connection.
- The device must be installed in such a way as to prevent contact
with the electrical connections.
- If, together with the product, a main cord is not provided, or if a
main cord is provided without a plug: a circuit breaker must be
used with the product such that a 3 mm gap stands between all
contacts capable of severing the electricity among all of the poles
on the product.
- During product installation, ensure that no more than one of its
side surfaces, if necessary, stands close to a high wall or cupboard.
In wall ovens that come with the pyrolitic cleaning function, a
minimum distance of 30 mm must be left between the oven's front
panel and furniture or wall of the building.
- For the safe and reliable operation of the device, it is recommended
that the back wall of the compartment into which it is installed be
open.
- The consituent materials of the installation cavity must be able to
withstand a temperature of 100°C. This is especially applicable to
and important for wooden materials, coverings that adhere to
edges, plastic surfaces, applied adhesives, paints and polishes.
Furniture in the device's imimediate vicinity must be able to with
stand a temperature of at least 70°C.
Matters to Pay Special Attention to Regarding the Oven's
Installation Cavity!
Prior to installing the device, the cutting of furniture and countertops
or renovation activities need to have been comipleted. Sawdust and
debris on the surfaces of furniture near which the product is to be
installed must be cleaned. Otherwise the device's cord and electrical
connection could become damaged.
- For the furniture cavity dimensions and the placement of the
device, see the diagram.
- If a drawer is to be located underneath the device, a separator
panel must be placed between the device and the drawer.
- Because the device is installed flush with the back wall, the
electrical socket, except for the device's mounting area, must be
located in an easily accessible place.
- For integrated ovens, the electrical connections and installation of
the stove control buttons must take into account that the stove
control buttons will be on the front panel of the oven.
- Ensure that the furniture cabinet of the kitchen countertop has
been stabilized/immobilized.
- For the oven's proper ventilation, there must be a distance of up
to 35 mm between intervening furniture surfaces and the back
wall.
Matters to Pay Special Attention to Regarding the
Positioning of the Oven
- By pushing the device, insert it fully into the furniture
compartment.
Attention! During insertion, ensure that the electrical cable is not
broken or pinched.
- For air circulation, some empty space must remain between the
walls and the compartment into which the device is installed. For
this reason, prior to stabilizing/immobilizing the device, try to center
it within the cabinet.
- After positioning the device, stabilize/lmmobilize it with screws as
shown in the diagram.
- The space between the upper surface and the device must not be
blocked/occupied by any object.
When removing the oven from the furniture cavity,
- Disconnect the device's electricity.
-Unscrew the stabilization/immobilization screws.
- Remove the device by slowly lifting and pulling out.
20