Operating the oven – Beko 4710 TBA User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operating the oven

Oven heating control knob

This knob is used together with the

"function selection" knob. Select the

desired stage with the "function

selection" knob. Then rotate the "oven

heating control" knob clockwise. The
lamp and the heating elements in

conjuction with the stage you have
selected, or the fan will come on line.
The temperature in the oven shall be
sensed by the thermostat. The
thermostat switches off the heating
element and the thermostat light when
the set temperature level is reached

inside the oven. When the temperature

falls below thermostat comes back on

line and the thermostat light
illuminates. This way, the set

temperature level is maintained
throughout the cooking period.

Function selection knob

This knob allows you to select
functions and carry out checks. The
functions and their stages are
explained below. In order to operate
the stages, you need to bring the

"function selection" knob together

with the "oven heating control" knob
to the desired temperature degree and
adjust the timer if there is. If your
cooker has timer; refer to the

description of timer usage.

Using the oven's timer; If your oven has

a timer; You can do
full automatic, semi automatic and manual
cooking.
You should adjust the electronic timer prior
to using oven.
The electrical current to the heatings
elements flows thought the electronic

timer. The timer must be set in order for

the heating elements to go into operation.

In automatic cooking; do not leave spoilable

foods in the oven up to cooking start time.

* The kinds of food you want to cook.

Thermostat

positions.

Shelf

positions

and recommended cooking times are

given at the cooking table.

* Bring the thermostat knob to the

position you want and function knob

to the " [^" position.

* Preheat the oven for 10 minutes with

oven door closed.

* Locate the meal you want to cook

into the oven after preheating.

* After cooking, bring the knobs to

the "0" position.

The stages of the static oven

function selection knob

Top and bottom heaters
are on.

Bottom heater is on.

Top heater is on.

Means only the grill heater

is on.

You must bring to the

heating control knob to the
maximum temperature.

06

Advertising
This manual is related to the following products: