Burley Travoy User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
automatically when the flex connector is fully seated. To disconnect
the trailer, rotate the latch then lift the flex connector off the hitch pin.
Hold your bike upright to make it easier for the coupling to slide on
and off the pin.
Notes:
1. Hitch is compatible with 25mm to 32mm seat posts.
2. Use of this hitch with carbon fiber seat posts is not recommended.
3. if your legs rub on the sides of the hitch, lowering it can help.
Advertising