Cassette player, Setting the clock, Listening to a tape – Sony XR-3753 User Manual

Page 5: Tape

Advertising
background image

5

EN

Setting the clock

The clock has a 24-hour digital indication.

For example, setting it to 10:08

1

Press (OFF) or (DSPL) during operation.

2

Press (DSPL) for two seconds.

1 Set the hour digits.

2 Press (SEL) momentarily.

3 Set the minute digits.

3

Press (DSPL) momentarily.

Note
If the POWER SELECT switch on the bottom of the unit is
set to the
B position, the clock cannot be set unless the
power is turned on. Set the clock after you have turned on
the radio.

The hour digit flashes.

To go backward

To go forward

The minutes digits flashes.

To go backward

To go forward

The clock starts.

Getting Started/Cassette Player

Cassette Player

Listening to a tape

Insert a cassette.

Playback will start automatically.

If a cassette is already inserted, press

(SOURCE) repeatedly until “TAPE” is
displayed.

The side facing up is being played.

The side facing down is being played.

Tip
To change the tape transport direction, press
(MODE)

(*) during tape playback.

Fast-winding the tape

During playback, press either side of
(SEEK/AMS) for two seconds.

To start playback during fast-forwarding or

rewinding, press (MODE) (*).

Press
(OFF)
6

To
Stop playback
Eject the cassette

Fast-forward

Rewind

100

1000

1000

1008

1008

SEEK

AMS

TAPE

TAPE

Advertising
This manual is related to the following products: