Detaching and attaching the front panel, Attaching the front panel, 1 press pwr to turn the unit off – Aiwa CT-X409 User Manual

Page 5: Security lamp

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DETACHING AND

ATTACHING THE FRONT

PANEL

Attaching the front panel

You can detach the front panel from the unit and
carry it with you when you ieave your car

unattended.

When you carry the front panel out of your car,

use the supplied carrying case.
Before detaching the front panel, remove the

cassette to prevent possible damage to the unit.

1

Press PWR to turn the unit off.

2

While supporting the front panel with

one hand, press i, to release one side
of the panel. Care must be taken not to

drop the panel. It may suddenly eject at
this point.

3

When the front panel is lifted from the

unit, remove it by pulling it away from

the unit.

Do NOT touch the connector on the reverse

side of the front panel, as doing so may

contaminate the connector and cause a poor

connection resulting in a malfunction.

Security Lamp

When the front panel is detached, you can find an

LEED lamp on the front side of the unit. This lamp

is designed to deter theft, and continues to flash

when the front panel is detached. This unit is not
equipped with any other security systems such
as a security alarm, so there are limitations to its

effectiveness.

LED lamp

ENGLISH

4

Advertising