Beko BD-610 - Manual (Page 17)

Only if details shared: Only Skype
users authorized by you can call you.
4. Or press Scrolling button and Left key
to select Skypein calls, you are allowed
to select Anyone, Known numbers. Only
my contacts. Press Scrolling button and
Left key to select one you prefer.
Anyone: You can receive calls from
anyone calling your Skypein number.
Known numbers: Only Skypein calls
providing a Caller ID will be accepted.
Oniy my contacts: OnlySkypeOut
contacts on your Contact list can call
you.
5. Or press Scrolling button and Left key
to select Manage blocked users, you
are allowed to view the blocked users.
Press Scrolling button and Left key to
Phone Settings
unblock the user you prefer.
Notification
You can choose whether you want to
be alerted by a tone whenever you
receive a voicemail or an authorization
request.
1. In standby mode, press Left key to
enter main menu;
2. Press Scrolling button and Left key
to select Settings;
3. Press Scrolling button and Left key
to select Tones;
4. Press Scrolling button and Left key
to select Notification tones;
5. Press Scrolling button and Left key
to turn notification tones on or just Left
key to turn them on.
internet Settings
You can configure settings such as IP
Setting, IP address. Subnet mask.
Default gateway. Primary DNS and
Secondary DNS. However, if you have
an advanced Internet connection and
are not familiar with firewalls and ports,
we recommend that you consult
someone with knowledge on this or read
more on the topic at www.skype.cxrm.
In IP Setting you can choose DHCP
(Dynamic Host Configuration Protocol)
or Static. The DHCP IP setting covers
the needs of most users. Should you
wish to attach the base station to an
Internet connection using the static IP
mode instead, this is how to configure
this mode below.
1. Press Scrolling button and Left key
to select Settings under main menu
mode;
2. Press Scrolling button and Left key
to select Network;
3. Press Left key to select IP Setting;
4. Press Scrolling button and Left key
to select Static;
Now it is easy to set IP address. Subnet
mask. Default gateway, Primary DNS
and Secondary DNS here.
Tones
You can configure different kinds of tones
on your Dect phone.
To enter the Tones mode
1. In standby mode, press Left key to
enter main menu;
2. Press Scrolling button and Left key
to select Settings;
3. Press Scrolling button and Left key
to select Tones;
To Change the Incoming Call Alert
You can define how you want your Dect
phone to alert you with incoming calls:
Ringing: The handset will ring as long
as the incoming call is active.
Ring once: The handset will ring only
once.
Beep once: The handset will make one
beep only on an incoming call.
Off: The handset will not make any voice
on an incoming call.
1. Press Left key to select Incoming
15