AEG VITRAMIC 7250 K - Manual (Page 9)

Care and cleaning of the ceramic hob
Cleaning procedure
1. Clean the ceramic hob after every use with
a clean, damp cloth and a little washing up
liquid. Then wipe the cooking area dry with
a clean cloth. No detergent residues should
remain on the surface.
2. For light to normal soilage, clean the entire
hob with Stahl-fix* or Sidol Edelstahlglanz*.
Then rinse the entire cooking area
thoroughly with clean water and wipe dry
with a clean cloth. No detergent residues
should remain on the surface.
3. For normal use, the hob should be condi­
tioned once a week. We recommend the
use of “Collo profi”*or “Cera-fix”*which
have been developed especially for this
purpose. Collo profi and Cera-fix clean and
protect the hob by creating a silicon film
which acts as a water and dirt repellant.
Use of the conditioning products will ensure
that the hob is easy to clean and offers
protection against damage from sugar and
highly sweetened food stuffs.
*
All these cleaning products are available
from AEG Spare Parts Department.
Heavy soiling and stains
Clean spillages off the hob after every use
Mineral deposits, present in hard water and
food, may cause discolouration in the form
of grey, mother of pearl stains which appear
to be on the surface. Clean such discolour-
ations while the cooking area is still warm
(not hot). Then clean the cooking area as
described under 2. and 3.
If the calcareous deposits have turned
brown, they are already quite severe and
the only way of removing them is intensive
cleaning, which may have to be repeated
several times.
Boiled over food should first be wiped with
a damp cloth and dirt residues finally re­
moved with a glass or razor blade scraper*.
Then clean as described under 2.
Burnt on sugar or molten plastic should be
immediately removed when still hot - with a
glass scraper. Clean the cooking area as
described under 2.
Do not allow spillages to become burnt into
the surface by repeated heating.
Available via AEG Spare Parts Department.